One way I like doing exploratory refinement with LLMs is to ask for variants of a particular UI or interaction. This time, the material was my own logo: a small waveform beside The Faint Signal wordmark.
Start with alternatives
I asked for two treatments alongside the original: a subtle pill-shaped outline, like a minimalist vacuum tube, and a glass version that fills with light on hover.
The direction was explicit. It could just as easily have been an open-ended request for alternatives. The useful part was seeing working variants side by side, at their actual navigation size and against the site’s velvet texture.
Refine what you can feel
The next steps were small, specific adjustments. Speed up the beam on hover. Let it accelerate more slowly. Try longer tails, then return to the original length. Make cooling follow the same pace as heating.
The glass treatment became a study in light: electric yellow around a small white-hot core, with red at the outer edges. The wordmark follows the same heat, with a slight blur and glow shaped around the letters. At peak heat, a hidden Morse message pulses through the wordmark alone.
Each change gave me something concrete to react to. Some ideas survived; others were useful because I could try them and reverse them.
How it works
The logo is SVG, built from a waveform path with a circular amplitude envelope. A moving dot and short trail of stroke segments form the beam. A frame loop changes their speed as hover or keyboard focus builds a shared charge value.
CSS variables carry that charge into the background fill, glass reflections, and text. Gradients, glyph-clipped fills, and layered shadows create the heat without a rendered animation file. The Morse pulse uses timed dots, dashes, and gaps; its dim state retains some text fill. Reduced-motion mode keeps the interaction static.
The layered pulse was inspired by Simey’s glow-effect study on CodePen.
Let other people try it
I added voting to the logo lab. A browser cookie identifies a saved ballot, and visitors can change their choice. Results appear after voting, and the selected card flips to a sharing panel so visitors can invite someone else to try it.
The useful part
This site is entirely vibe-coded, down to the logo and image processing, including upscaling the hero image. The design work happens in the actual site: once I’m happy with a refinement, the working code can go straight into the live experience.
This is a small logo experiment, but the same technique applies to a UI or interaction: ask for alternatives, try them in context, and keep refining through specific feedback.
See the original LinkedIn post.
Recreate the logo
Copy this prompt into your coding assistant with your project open. It describes the waveform, glass, heat, and Morse animation shown above. Change the name, typeface, colors, and hidden message to make it your own.
Build a working reproduction of The Faint Signal's glass-tube logo in my project. Use HTML, CSS, SVG, and a small JavaScript animation loop, adapted to the project's existing framework. Deliver working code and a responsive demo, not a rendered video or image.
1. Composition
Set THE FAINT SIGNAL in Anton, a condensed uppercase font, with the waveform mark to the RIGHT of the text. Default to warm-white text (#f4efe6) on a nearly black background (#0e0c0b). Use brand yellow #ffde08 for the beam and every tail segment throughout the entrance, heating, peak, and cooldown. Bind their color to the primary brand token, never a context-dependent accent or heat gradient. Keep it compact enough for a navigation bar: roughly 21px text, a 56px-wide mark, and a small gap. Scale the demo responsively. Start the navigation text outlined during its entrance reveal, then fill it white and keep it readable at rest.
2. Exact waveform
Generate an SVG path with 601 samples, i = 0...600. For each sample:
t = i / 600
x = 21 + 38 * t
y = 20 - 19 * sqrt(max(0, 1 - (2*t - 1)^2)) * sin(14*pi*t)
Start with M2 20, connect every sample with L, and end with L78 20. This creates seven oscillations with a circular amplitude envelope and flat leads. Set pathLength="1". Use a warm-white resting stroke, 1.6 units wide. Give each SVG instance unique IDs.
3. Glass vacuum tube
Use viewBox="-8 -8 96 56". Surround the wave with a pill at x=-6, y=-6, width=92, height=52, rx=26. Keep a clearly visible, fine warm-white border at about 40% opacity at rest. Layer translucent SVG gradients for the glass body, rim, yellow light, and heat bloom. Add a short reflection following the top-right curve: M42 -1 H58 A21 21 0 0 1 74.087 6.502. Extend it horizontally along the top-right rim, with only a shallow curved end that stays well clear of the middle signal line. Keep its total length about half the original long highlight. Rotate the same path to the bottom-left with translate(80 40) scale(-1 -1). Make the glass feel dimensional without a bulky frame.
4. Moving beam and short tail
Move a bright yellow dot along the waveform. Use a small solid core and a faint larger halo. Build a short trail from 24 copies of the same SVG path, each with stroke-dasharray="0.004 2", stroke width 2.4, and opacity (1 - i/24)^2. Set each segment's dash offset to (i+1)*0.004 - phase. The tail occupies about 9.6% of the path; keep that length constant as speed changes. Show the beam and its yellow tail immediately when interaction starts, without fading them in as charge builds. Fade the separate background line slowly.
5. Interaction and speed
Activate on pointer hover, visible keyboard focus, or touch press-and-hold. Use one requestAnimationFrame loop for the beam, tube, and wordmark. Let dt be elapsed seconds, capped at 0.064. Ramp charge from 0 to 1 over 14.4 seconds while active, and reduce it at the same rate after release:
charge = clamp(charge + (active ? dt/14.4 : -dt/14.4), 0, 1)
phase = (phase + dt*(1/1.4 + 36*charge)) % 1
Use phase for the dot's offset-distance and trail offsets. Keep phase continuous through heating and cooling. Stop the loop once fully cooled. A quick mobile tap on a wordmark link should still navigate; holding should preview the animation without navigating. Release, pointer cancellation, or losing capture ends the hold. Preserve normal page scrolling.
6. Slow fill and heat
Maintain a separate backgroundCharge: increase it by dt/7.2 while active and decrease it by dt/14.4 while cooling, clamped to 0...1. Set background fill opacity to backgroundCharge^3, so yellow does not fill the wave immediately. Crossfade the resting line against that fill. Set glass energy to min(1, 3*backgroundCharge). Set heat to max(0, (charge - 0.55)/0.45)^2 so the hottest color arrives near peak speed. Share these values through CSS custom properties, and reverse the same curves during cooldown.
7. Wordmark and white-hot glow
Make the wordmark heat in sync with the signal. Clip a vertical gradient inside the letters: narrow orange-red edges (#ed581c) at 0% and 100%, yellow (#ffe34d) at 8% and 92%, and mostly white (#fffef5) from 22% to 78%. Interpolate from the resting text into this gradient as heat rises. Add subtle highlights, up to 0.2px of blur, and layered yellow/red drop shadows that follow the actual glyph shapes. Keep red at the outer edges; do not turn the whole wordmark red or draw a rectangular glow behind it. Make the glass and waveform peak predominantly electric yellow: use a small white-hot center at 0%, pale yellow at 8%, brand yellow from 22% to 65%, orange at 82%, and a restrained red outer bloom at 94%, fading to transparent at 100%. Keep the filament bright yellow (#ffe34d) at peak.
8. Morse code Easter egg
Only at full charge, pulse ONLY the wordmark's fill and glyph glow in Morse code: "You found A Signal. Stay curious." Use a 180ms dot, a three-unit dash, one-unit symbol gaps, three-unit letter gaps, seven-unit word gaps, and 14-unit pauses after sentences. Encode periods too. Repeat the message while the interaction stays at peak. Smooth each lit pulse with a 30ms attack and 45ms release. Between pulses retain 25% text fill and a faint 0.5px outline at 20% opacity; do not make the letters disappear. Keep the waveform beam, filament, and glass glow steady during Morse pulses. On release, stop transmitting and cool down normally. Expose the decoded message in a data-morse-message attribute on the wordmark and SVG so it can be discovered through Inspect.
9. Accessibility and implementation
Respect prefers-reduced-motion: keep the logo static, with a simple glass highlight on hover/focus and no beam motion or Morse pulses. Give interactive demos a visible keyboard focus indicator and accessible name. Prevent text selection and the long-press callout on the wordmark without blocking native scrolling. Use unique SVG IDs and support multiple independent logo instances. Keep animation state separate from layout and expose colors and typography as easy-to-change values. Verify desktop hover, keyboard focus, mobile holding and release, and reduced-motion behavior. Explain where to customize the name, typeface, colors, and hidden message.